[Elecraft] K4 Questions

[Grant Youngman]

I recall that Eric answered a question about that during one of the two 90 minute Q&As at the Expo.

I think he said it may be available at some point, but indicated it was possibly over ethernet (?) rather than USB.  But I could be mistaken, since I’m lucky to remember my name unless I look at my driver’s license … if I can remember where that is :-)

Whichever it is, it didn’t sound like it was going to be a first release feature.

Grant NQ5T

> On Aug 15, 2020, at 11:42 AM, Barry LaZar <k3ndm at comcast.net> wrote:
> 
> Bill,
>     I really don't know. If it was posted, I missed it.
> 
> 73,
> Barry
> K3NDM
> 
> On Sat, Aug 15, 2020, 2:27 AM Nr4c <nr4c at widomaker.com> wrote:
> 
>> Barry
>> 
>> Did I read months ago that I/Q might be available on USB?  Or was it posed
>> as a question or suggestion?
>> 
>> Sent from my iPhone
>> ...nr4c. bill
>> 
>> 
>>> On Aug 15, 2020, at 12:03 AM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:
>>> 
>>> On Tue, Aug 11, 2020 at 5:51 PM Barry LaZar <barrylazar2 at gmail.com>
>> wrote:
>>> 
>>>> is the pan presentation fixed as to frequency span or can the frequency
>>>> span be adjusted; I typically use 25-50 KHz on CW or
>>>> less on data modes.
>>> 
>>> 
>>> Span and center frequency are adjustable.  Fixed or tracking mode is
>>> available.  Scrolling mode (to prevent VFO cursor from going off screen)
>>> has different options, similar to P3:  full page, half page, slide, etc.
>>> 
>>> 
>>>> Next can the xvter IF out be used as the IF out on the K4D?
>>> 
>>> 
>>> Probably it will work the same as a K3.
>>> 
>>> 
>>>> Or, is the I&Q available for use o0n applications like CW Skimmer; This
>>>> requires a MME format.
>>>> 
>>> 
>>> I don't think that will work.  Connecting a separate SDR to RX ANT OUT
>>> would be a simpler way to do it.  A program like HDSDR can keep the SDR
>>> frequency in sync with the K4 frequency.
>>> 
>>> 73,
>>> Bob, N6TV
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to nr4c at widomaker.com
>> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ghyoungman at gmail.com