[Elecraft] K4 Questions

[Nr4c]

Barry

Did I read months ago that I/Q might be available on USB?  Or was it posed as a question or suggestion?

Sent from my iPhone
...nr4c. bill


> On Aug 15, 2020, at 12:03 AM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:
> 
> On Tue, Aug 11, 2020 at 5:51 PM Barry LaZar <barrylazar2 at gmail.com> wrote:
> 
>> is the pan presentation fixed as to frequency span or can the frequency
>> span be adjusted; I typically use 25-50 KHz on CW or
>> less on data modes.
> 
> 
> Span and center frequency are adjustable.  Fixed or tracking mode is
> available.  Scrolling mode (to prevent VFO cursor from going off screen)
> has different options, similar to P3:  full page, half page, slide, etc.
> 
> 
>> Next can the xvter IF out be used as the IF out on the K4D?
> 
> 
> Probably it will work the same as a K3.
> 
> 
>> Or, is the I&Q available for use o0n applications like CW Skimmer; This
>> requires a MME format.
>> 
> 
> I don't think that will work.  Connecting a separate SDR to RX ANT OUT
> would be a simpler way to do it.  A program like HDSDR can keep the SDR
> frequency in sync with the K4 frequency.
> 
> 73,
> Bob, N6TV
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com