[Elecraft] K4 Questions

[Barry LaZar]

Bob,

     Thanks much for the response.

73,

Barry

K3NDM

On 8/15/2020 12:01 AM, Bob Wilson, N6TV wrote:
> On Tue, Aug 11, 2020 at 5:51 PM Barry LaZar <barrylazar2 at gmail.com 
> <mailto:barrylazar2 at gmail.com>> wrote:
>
>      is the pan presentation fixed as to frequency span or can the
>     frequency span be adjusted; I typically use 25-50 KHz on CW or
>     less on data modes.
>
>
> Span and center frequency are adjustable.  Fixed or tracking mode is 
> available.  Scrolling mode (to prevent VFO cursor from going off 
> screen) has different options, similar to P3:  full page, half page, 
> slide, etc.
>
>     Next can the xvter IF out be used as the IF out on the K4D? 
>
>
> Probably it will work the same as a K3.
>
>     Or, is the I&Q available for use o0n applications like CW Skimmer;
>     This requires a MME format.
>
>
> I don't think that will work.  Connecting a separate SDR to RX ANT OUT 
> would be a simpler way to do it.  A program like HDSDR can keep the 
> SDR frequency in sync with the K4 frequency.
>
> 73,
> Bob, N6TV
>