[Elecraft] K3S poor CW keying further investigation

[Don Wilhelm]

Solder each power supply lead to a short length of #10 wire.  Insulate 
the connection well.

73,
Don W3FPR

On 4/25/2020 11:12 AM, Ron Manfredi wrote:
> Fewer power supplies (meaning the switching type) have actual terminal 
> bolts to use with ring connectors.  If the supply doesn't have that type 
> of connector, then what alternatives are there to being able to use one 
> supply in a station that has more than one high current rig,  (even if 
> they are not used at the same time) since the connectors on most of 
> these supplies will take at most only one 10-12 gauge cable?
> 
> Ron   WA2EIO