[Elecraft] setting KPA 100 page 48 problem

[Christophe aufacf]

good evening Don,

visually C71 blue capacitor "82J" so correct for registration, I think?

for C71 in conjunction with K13 pin 7 and K14 pin 4 on the diagram

I will give you the continuities on the relays tomorrow after having
started the K2 on 40M then having turned it off


thanks again for your great help

good night, here it is 22H local

73, Cris F8ACF

Le sam. 11 avr. 2020 à 21:15, Don Wilhelm <donwilh at embarqmail.com> a écrit :
>
> Christophe,
>
> I made a mistake on the value of C71.  With no K60XV installed, the
> proper value is 82pF (marked either '82' or 820').
>
> 73,
> Don W3FPR
>
> On 4/11/2020 12:38 PM, Christophe aufacf wrote:
> > hello don
> >
> > I forgot to answer you no K60XV, no rework that I do not know this
> > option, I have the NB option provided for purchase
> >
> > for the parameter D19 = N
> >
> > thank you in advance
> >
> > 73 , Cris  F8ACF
> >
> > Le sam. 11 avr. 2020 à 16:52, Don Wilhelm <donwilh at embarqmail.com> a écrit :
> >> Christophe,
> >>
> >> You have not yet answered 2 important questions which relate to your 40
> >> meter operation.
> >>
> >> 1) Do you have the K60XV option installed (or do you have the Rework
> >> Eliminators installed)?
> >>
> >> 2) What is your setting of the secondary menu D19 parameter?
> >>
> >> The answers to those 2 questions is critical to what to do next in
> >> troubleshooting your problem.
> >>
> >> 73,
> >> Don W3FPR
> >>
> >> On 4/11/2020 5:24 AM, Christophe aufacf wrote:
> >>> hello don
> >>>
> >>> the frequency to find with CAL FACT 18.159 kHz
> >>>
> >>> thank you in advance for your good advice
> >>>
> >>> 73 , Cris F8ACF
> >>>
> >>> Le ven. 10 avr. 2020 à 21:21, Don Wilhelm <donwilh at embarqmail.com> a écrit :
> >>>> Christophe,
> >>>>
> >>>> Tune the K2 to 7100kHz
> >>>> Then plug the internal counter probe into TP1 and the P6 header on the
> >>>> Control Board.
> >>>> Enter the menu to CAL FCTR and hold EDIT
> >>>> The frequency will be seen in the K2 display.
> >>>>
> >>>> You could alternately use an external frequency counter to read the
> >>>> frequency at TP1.
> >>>>
> >>>> 73,
> >>>> Don W3FPR
> >>>>
> >>>> On 4/10/2020 2:48 PM, Christophe aufacf wrote:
> >>>>
> >
>


-- 
73 , F8ACF56