[Elecraft] setting KPA 100 page 48 problem

[Christophe aufacf]

hello don

I forgot to answer you no K60XV, no rework that I do not know this
option, I have the NB option provided for purchase

for the parameter D19 = N

thank you in advance

73 , Cris  F8ACF

Le sam. 11 avr. 2020 à 16:52, Don Wilhelm <donwilh at embarqmail.com> a écrit :
>
> Christophe,
>
> You have not yet answered 2 important questions which relate to your 40
> meter operation.
>
> 1) Do you have the K60XV option installed (or do you have the Rework
> Eliminators installed)?
>
> 2) What is your setting of the secondary menu D19 parameter?
>
> The answers to those 2 questions is critical to what to do next in
> troubleshooting your problem.
>
> 73,
> Don W3FPR
>
> On 4/11/2020 5:24 AM, Christophe aufacf wrote:
> > hello don
> >
> > the frequency to find with CAL FACT 18.159 kHz
> >
> > thank you in advance for your good advice
> >
> > 73 , Cris F8ACF
> >
> > Le ven. 10 avr. 2020 à 21:21, Don Wilhelm <donwilh at embarqmail.com> a écrit :
> >> Christophe,
> >>
> >> Tune the K2 to 7100kHz
> >> Then plug the internal counter probe into TP1 and the P6 header on the
> >> Control Board.
> >> Enter the menu to CAL FCTR and hold EDIT
> >> The frequency will be seen in the K2 display.
> >>
> >> You could alternately use an external frequency counter to read the
> >> frequency at TP1.
> >>
> >> 73,
> >> Don W3FPR
> >>
> >> On 4/10/2020 2:48 PM, Christophe aufacf wrote:
> >>
>


-- 
73 , F8ACF56