[Elecraft] setting KPA 100 page 48 problem

[Don Wilhelm]

Christophe,

You have not yet answered 2 important questions which relate to your 40 
meter operation.

1) Do you have the K60XV option installed (or do you have the Rework 
Eliminators installed)?

2) What is your setting of the secondary menu D19 parameter?

The answers to those 2 questions is critical to what to do next in 
troubleshooting your problem.

73,
Don W3FPR

On 4/11/2020 5:24 AM, Christophe aufacf wrote:
> hello don
>
> the frequency to find with CAL FACT 18.159 kHz
>
> thank you in advance for your good advice
>
> 73 , Cris F8ACF
>
> Le ven. 10 avr. 2020 à 21:21, Don Wilhelm <donwilh at embarqmail.com> a écrit :
>> Christophe,
>>
>> Tune the K2 to 7100kHz
>> Then plug the internal counter probe into TP1 and the P6 header on the
>> Control Board.
>> Enter the menu to CAL FCTR and hold EDIT
>> The frequency will be seen in the K2 display.
>>
>> You could alternately use an external frequency counter to read the
>> frequency at TP1.
>>
>> 73,
>> Don W3FPR
>>
>> On 4/10/2020 2:48 PM, Christophe aufacf wrote:
>>