[Elecraft] KPA100 and Audio Issue

[Rich]

Thanks for your help as always.   Well frankly I have been calling it 
the wrong thing forever.

Rich

On 4/6/2020 14:09 PM, Don Wilhelm wrote:
> Rich,
>
> Well, since the KPA100 is an option for the K2 (and not for any other 
> transceiver), I did not make a typo.
> Since you have the K3S, the 100 watt amplifier is the KPA3.
> That is why one has to be careful when specifying designations of 
> options.
>
> As I recall, that distorted audio on the K3S is a symptom of a failure 
> in the LPA on the RF Board.  Contact support at elecraft.com to get some 
> points to check.
>
> 73,
> Don W3FPR
>
> On 4/6/2020 1:43 PM, Rich wrote:
>> Just to make sure that was a typo you said K2??
>>
>> I did your test on my K3S and I am getting about 55 watts on the meter
>>
>> Any other ideas?
>>
>> Thank you so much
>>
>
>