[Elecraft] KPA100 and Audio Issue

[Don Wilhelm]

Rich,

Well, since the KPA100 is an option for the K2 (and not for any other 
transceiver), I did not make a typo.
Since you have the K3S, the 100 watt amplifier is the KPA3.
That is why one has to be careful when specifying designations of options.

As I recall, that distorted audio on the K3S is a symptom of a failure 
in the LPA on the RF Board.  Contact support at elecraft.com to get some 
points to check.

73,
Don W3FPR

On 4/6/2020 1:43 PM, Rich wrote:
> Just to make sure that was a typo you said K2??
>
> I did your test on my K3S and I am getting about 55 watts on the meter
>
> Any other ideas?
>
> Thank you so much
>