[Elecraft] K3 SSB Filters

[tony.kaz at verizon.net]

John, I concur. When I am running them especially on 20M I find I have the
LO Cut at .35 and the HI Cut at 2.25-2.35. Audio is good. Below 2.25 if the
calling station is a little off freq or has terrible audio I may waste time
trying to get the call.
N2TK, Tony

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On
Behalf Of john at kk9a.com
Sent: Wednesday, April 1, 2020 7:30 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 SSB Filters

I concur. I have 2.8, 2.1 and 1.8 KHz 8 pole roofing filters in my K3S. I
made over 8500 SSB QSOs last month and I used the 2.1 KHz roofing filter for
all of them.

John KK9A



Jim Brown K9YC wrote:


I tried that and didn't like the result. I prefer 2.1 kHz 8 pole

73, Jim K9YC


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to tony.kaz at verizon.net