[Elecraft] VX commands don't work

[David Box]

VXn works for me, don't remember the firmware change that activated the set feature about a year ago.
de Dave K5MWR 

On September 22, 2019 4:30:54 PM MDT, Don Wilhelm <donwilh at embarqmail.com> wrote:
>George,
>
>The VX command is "GET" only, so you can determine the VOX status, but 
>you cannot SET it.
>See the K3 Programmer's Reference Manual.
>
>73,
>Don W3FPR
>
>On 9/22/2019 6:16 PM, Kidder, George wrote:
>> GE all,
>> 
>> I recently tried to incorporate the VX command into some macros for
>my
>> older K3.  With the K3 utility connected directly to Com1, the VXn
>> command has no effect on the VOX state, although other commands work
>as
>> expected.  I run the VOX on AUTO OFF (CW WT tap 5) to avoid startup
>> problems, but returning to NOR has no effect.  Is this a known bug or
>a
>> single-unit flaw.  Any others have this experience?
>> 
>> I can certainly live without this feature - I have for nearly a
>decade,
>> but it would be nice to have it in some macros.
>> 
>> George, W3HBM
>> Bar Harbor, ME
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to donwilh at embarqmail.com
>> 
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to dobox at suddenlink.net 

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.