[Elecraft] VX commands don't work

[Dick Dievendorff]

But maybe you can “press” the VOX button with SWH or SWT.
I’m away from my station so I can’t try it right now.

73 de Dick, K6KR

> On Sep 22, 2019, at 15:30, Don Wilhelm <donwilh at embarqmail.com> wrote:
> 
> George,
> 
> The VX command is "GET" only, so you can determine the VOX status, but you cannot SET it.
> See the K3 Programmer's Reference Manual.
> 
> 73,
> Don W3FPR
> 
>> On 9/22/2019 6:16 PM, Kidder, George wrote:
>> GE all,
>> I recently tried to incorporate the VX command into some macros for my
>> older K3.  With the K3 utility connected directly to Com1, the VXn
>> command has no effect on the VOX state, although other commands work as
>> expected.  I run the VOX on AUTO OFF (CW WT tap 5) to avoid startup
>> problems, but returning to NOR has no effect.  Is this a known bug or a
>> single-unit flaw.  Any others have this experience?
>> I can certainly live without this feature - I have for nearly a decade,
>> but it would be nice to have it in some macros.
>> George, W3HBM
>> Bar Harbor, ME
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to donwilh at embarqmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dick at elecraft.com