[Elecraft] VX commands don't work

[Don Wilhelm]

George,

The VX command is "GET" only, so you can determine the VOX status, but 
you cannot SET it.
See the K3 Programmer's Reference Manual.

73,
Don W3FPR

On 9/22/2019 6:16 PM, Kidder, George wrote:
> GE all,
> 
> I recently tried to incorporate the VX command into some macros for my
> older K3.  With the K3 utility connected directly to Com1, the VXn
> command has no effect on the VOX state, although other commands work as
> expected.  I run the VOX on AUTO OFF (CW WT tap 5) to avoid startup
> problems, but returning to NOR has no effect.  Is this a known bug or a
> single-unit flaw.  Any others have this experience?
> 
> I can certainly live without this feature - I have for nearly a decade,
> but it would be nice to have it in some macros.
> 
> George, W3HBM
> Bar Harbor, ME
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>