[Elecraft] [K3S] Side tone, SPOT discrepancy

[Bill Weaver]

You don't have the shift off center do you? Of course I've never done that before :-).
 

 
73,
 
Bill WE5P
 
 
 

 
 
 
 
 
>  
> On Oct 21, 2019 at 19:40, Robert G Strickland via Elecraft  <elecraft at mailman.qth.net>  wrote:
>  
>  
>  When using SPOT to have the radio tune to a received signal, the following is the result: the radio tunes to the received signal correctly as indicated by the CWT graph, but this frequency is some 50-100cps below the selected side tone frequency. In other words, after auto tuning, if PITCH is selected, the side tone pitch is significantly higher than the received CW pitch to which the radio has auto tuned [hope this is clear]. The particular side tone pitch selected doesn't effect this result. EG, select 450cps side tone pitch and the radio tunes to around 400cps Note, this is after the radio has been through Elecraft maintenance for another problem and subsequently certified as operating within specs. What's happening? ...robert -- Robert G Strickland, PhD ABPH - KE2WY rcrgs at verizon.net.usa Syracuse, New York, USA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailma!
 n.qth.net
/mmfaq.htm Post: mailto:Elecraft at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to weaverwf at usermail.com 
>