[Elecraft] [K3S] Side tone, SPOT discrepancy

[Robert G Strickland]

When using SPOT to have the radio tune to a received signal, the 
following is the result: the radio tunes to the received signal 
correctly as indicated by the CWT graph, but this frequency is some 
50-100cps below the selected side tone frequency. In other words, after 
auto tuning, if PITCH is selected, the side tone pitch is significantly 
higher than the received CW pitch to which the radio has auto tuned 
[hope this is clear]. The particular side tone pitch selected doesn't 
effect this result. EG, select 450cps side tone pitch and the radio 
tunes to around 400cps Note, this is after the radio has been through 
Elecraft maintenance for another problem and subsequently certified as 
operating within specs. What's happening?

...robert
-- 
Robert G Strickland, PhD ABPH - KE2WY
rcrgs at verizon.net.usa
Syracuse, New York, USA