[Elecraft] K3S WSJT and FT8

[Barry]

Don,
     You are correct it works fine this way. I do it that way. Only one 
suggestion, use VOX. once tone is on the radio goes into transmit rather 
nicely. I do this for all the digital modes and have run into no 
problems. Once Elecraft added the internal sound card it really made 
operating easier.

73,
Barry
K3NDM


------ Original Message ------
From: "Don Wilhelm" <donwilh at embarqmail.com>
To: "Olof Lundberg" <olof at rowanhouse.net>; elecraft at mailman.qth.net
Sent: 11/26/2019 12:14:02 PM
Subject: Re: [Elecraft] K3S WSJT and FT8

>Olof,
>
>Are you connected to the K3S using the USB cable?
>If so, check the soundcard that WSJT-X is trying to use for audio output - it should be USB AUDIO CODEC.
>You must NOT have anything plugged into the K3S LINE IN jack unless you are using a different soundcard than the internal one.
>
>If the soundcard is correct, and you are using DATA A mode, set the input to LINE in the menu.
>
>You will have to set the audio levels (there are multiple controls - some in your computer software and the LINE level (mic knob) of the K3S.  You must end up with 4 bars solid on the ALC meter with the 5th bar flashing.
>See the article on my website www.w3fpr.com
>
>73,
>Don W3FPR
>
>On 11/26/2019 11:38 AM, Olof Lundberg wrote:
>>I have requests to do FT8 on top band from 3B8 right now. I have receive
>>going OK and also CAT but I can't get audio from WSJT-X on a WIndows 10
>>Home Pro laptop to get into my K3S. ANyone out there who can help?
>>
>>73 Olof G0CKV 3B9HA 3B9M
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to barrylazar2 at gmail.com