[Elecraft] K3S WSJT and FT8

[Don Wilhelm]

Olof,

Are you connected to the K3S using the USB cable?
If so, check the soundcard that WSJT-X is trying to use for audio output 
- it should be USB AUDIO CODEC.
You must NOT have anything plugged into the K3S LINE IN jack unless you 
are using a different soundcard than the internal one.

If the soundcard is correct, and you are using DATA A mode, set the 
input to LINE in the menu.

You will have to set the audio levels (there are multiple controls - 
some in your computer software and the LINE level (mic knob) of the K3S. 
  You must end up with 4 bars solid on the ALC meter with the 5th bar 
flashing.
See the article on my website www.w3fpr.com

73,
Don W3FPR

On 11/26/2019 11:38 AM, Olof Lundberg wrote:
> I have requests to do FT8 on top band from 3B8 right now. I have receive
> going OK and also CAT but I can't get audio from WSJT-X on a WIndows 10
> Home Pro laptop to get into my K3S. ANyone out there who can help?
> 
> 73 Olof G0CKV 3B9HA 3B9M