[Elecraft] KAT500 VSWR Threshold for key interrupt

[Andy Durbin]

Assuming the utility uses the ST command to set each band in turn then I suspect the utility fails to set all bands because the test for the first band being set correctly fails due to rounding errors. Once the test fails I suspect no attempt is made to set the other bands.

ST01K1.80; followed by ST01K; returns 1.80

ST01K1.50; followed by ST01K; returns 1.50

but

ST01K1.60; followed by ST01K; returns 1.59


It does seem to be possible to set all bands to 1.59 by setting each individually to 1.60 using the STbbK command.


73,
Andy, k3wyc