[Elecraft] KAT500 VSWR Threshold for key interrupt

[Andy Durbin]

The KAT500 utility provides the means to set a VSWR threshold for Key Interrupt either by individual band, or the same value for all bands.    Selecting ALL, entering 1.50 in the Amplifier Key Interrupt box, selecting Apply, results in 1.50 being set for all bands as expected. After the operation Apply is dim.  Leaving the Config menu and returning to it still shows 1.50 selected for all bands.

If All is reselected, 1.60 entered, and Apply selected then Apply does no go dim but the individual bands, and ALL,  each show 1.60. Then select OK and Operate.   Then return to Configuration, edit Configuration, VSWR Thresholds.  With ALL selected Amplifier Key Interrupt is blank.   Inspecting the value for each band shows 160 = 1.59 and all other bands 1.50.   The entered value of 1.60 was not applied.

This anomaly seems repeatable in that 1.50 can be entered, 1.55 can be entered, 1.80 can be entered,   but 1.60 and 1.56 cannot be.  The sign that that data entry has failed is that Apply does not go dim.

Is this a known problem with KAT500 utility 1.16.7.25?

Thanks,
Andy, k3wyc