[Elecraft] KX2 waterfall

Adam Goler adamgoler at gmail.com
Mon May 27 18:34:23 EDT 2019


Tom, Don,

Thanks! Win4K3Suite seems like a great option. From the video, if I
understood correctly, the MFJ switch splits the sending/receiving paths
such that the SDR play is used as the receiver, rather than the KX2. Is
there any impact to receiver performance? Can the KX2 noise rejection,
filtering, etc still be used? Or does the software do the heavy lifting
there instead?

Will look into trying this out....

Thanks and 73,
Adam KM6PHD

On Mon, May 27, 2019 at 10:16 Tom <elecraft.list at videotron.ca> wrote:

> Hi,
> Here is a video on how to set this up with the KX2.
> https://youtu.be/fxJq-aQivGk
> It will be pretty much the same for the KX2 except that you need the
> appropriate cable to turn on the switch when you go into transmit.  Also
> note that there is a newer MFJ switch called the MFJ1708SDR which no longer
> requires soldering a jumper.
> You can use this with an SDRPlay and Win4K3Suite or any software and
> corresponding SDR.
> 73 Tom
> Va2fsq.com
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net>
> On Behalf Of Don Wilhelm
> Sent: May 27, 2019 10:07 AM
> To: Adam Goler <adamgoler at gmail.com>; elecraft at mailman.qth.net
> Subject: Re: [Elecraft] KX2 waterfall
>
> Adam,
>
> The PX3 uses the RX I/Q output from the KX3.
> The KX2 has no RX I/Q output, so it cannot drive the PX3.
>
> Win4K3 does work with the KX2 and it has the capability to provide a
> panadapter display.  Just how that is done for the KX2 I am not certain,
> but you may want to check out the Win4K3 webpage.
>
> 73,
> Don W3FPR
>
> On 5/27/2019 8:58 AM, Adam Goler wrote:
> > Hello,
> >
> > Does the PX3 panadapter work for the KX2?
> >
> > Does anyone with a KX2 have a different panadapter-esque solution?
> >
> > I have a 7” android tablet that I was hoping to use as a waterfall
> > display/mobile computer for portable ops. But I could just as easily
> > substitute a small laptop or raspberry pi if necessary.
> >
> > Open to any suggestions!
> >
> > Thanks and 73
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> --
Adam Goler, PhD
Cell: (425) 985 8700



"Fear is the mind killer."


More information about the Elecraft mailing list