[Elecraft] Configuration of N1MM with K3 RemoteRig

[Jorge Diez (CX6VM-CW5W)]

Charly

You  also need a rs232 to usb interface, from COM1 on front of remoterig box to another USB port on the local computer running N1MMLogger 

73,
Jorge
CX6VM/CW5W

Enviado desde mi iPhone

El 4 may. 2019, a la(s) 13:50, Charles Tropp <charlestropp at gmail.com> escribió:

> Hi,
> 
> I recently installed a private K3-Remote System using my existing K3 and
> adding a K3/Ø Mini Control Panel. I have the RRIGSET and all required
> cables installed. I have tested the system and it appears to work well as I
> can both hear and control the remote radio and send CW on my straight key
> plugged into the back of the K3/Ø.
> 
> I would like to add the N1MM contest program using windows 10 Lap Top
> locally with a USB cable running from the USB socket on the front of the
> RRC to my Lap Top. I have configured both RRCs COM1 to: “Mode-7 CAT to COM2
> (local & remote)”.  The serial setting for COM1 has been set “Use USB Com
> Port as COM1” to YES. COM3 (extra) mode has been set to “Mode -8 Winkeyer”.
> 
> RRC 1258 Ø (COM 1)
> 
> RRC 1258 1(COM 11)
> 
> RRC 1258 2 (COM 12)
> 
> RRC 1258 3 COMExtra (COM 2)
> 
> So far I have been unable to configure N  1MM to communicate with my K3
> remote. COM 11 doesn’t work and COM12 produces unsolicited and random CW
> transmissions. COM2 make no difference.  Interestingly, I can use my K3
> remote with SKCCLogger with COM2. Any assistance would be greatly
> appreciated.
> 
> 
> 
> 73 Charles N2SO
> 
> 
> 
> 
> 
> -- 
> *73, Charles N2SO*
> *Treasurer, Quarter Century Wireless Association, Inc.*
> *www.qcwa.org <http://www.qcwa.org>*
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html