[Elecraft] Configuration of N1MM with K3 RemoteRig

[Charles Tropp]

Hi,

I recently installed a private K3-Remote System using my existing K3 and
adding a K3/Ø Mini Control Panel. I have the RRIGSET and all required
cables installed. I have tested the system and it appears to work well as I
can both hear and control the remote radio and send CW on my straight key
plugged into the back of the K3/Ø.

I would like to add the N1MM contest program using windows 10 Lap Top
locally with a USB cable running from the USB socket on the front of the
RRC to my Lap Top. I have configured both RRCs COM1 to: “Mode-7 CAT to COM2
(local & remote)”.  The serial setting for COM1 has been set “Use USB Com
Port as COM1” to YES. COM3 (extra) mode has been set to “Mode -8 Winkeyer”.

RRC 1258 Ø (COM 1)

RRC 1258 1(COM 11)

RRC 1258 2 (COM 12)

RRC 1258 3 COMExtra (COM 2)

So far I have been unable to configure N  1MM to communicate with my K3
remote. COM 11 doesn’t work and COM12 produces unsolicited and random CW
transmissions. COM2 make no difference.  Interestingly, I can use my K3
remote with SKCCLogger with COM2. Any assistance would be greatly
appreciated.



73 Charles N2SO





-- 
*73, Charles N2SO*
 *Treasurer, Quarter Century Wireless Association, Inc.*
*www.qcwa.org <http://www.qcwa.org>*