[Elecraft] Remote On/Off KPA-1500

[Dick Dievendorff]

Some do this with an RCA cable from the K3 rear panel 12v line to the amp REM connector. The amp turns on and off with the rig.  Current draw is minimal; you can also use the same K3 12v to power your P3.

73 de Dick, K6KR

> On Mar 14, 2019, at 17:57, Charlie Wirth <cfwirth at hotmail.com> wrote:
> 
> Hello:
> 
> I recently purchased a KPA-1500 amplifier.  I would like to be able to turn on the amplifier remotely.  The manual says to apply 12v to the REM jack.  I was wondering if anyone is doing this and what they are using to apply the 12 volts.
> 
> Thanks,
> 
> Charlie W3DDF
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html