[Elecraft] Settings for Digital use

[JAY]

Thanks so much for the info I will be trying it and other suggestions soon.

On Tue, Mar 12, 2019 at 2:18 PM Joe Subich, W4TV <lists at subich.com> wrote:

>
> Are you using DATA A for most daata modes and AFSK A for RTTY?
>
> Have you made sure there is *nothing* connected to the Line In jack?
>
> Have you confirmed that MENU:MIC+LINE = OFF?
>
> *AFTER* selecting DATA A/FSK A have you set MENU:MIC SEL = Line In?
>
> *AFTER* selecting DATA A/AFSK A have you adjusted the mic gain for
> *FOUR BARS* of ALC?  The Mic Gain control is "overloaded."  The
> Line In defaults to *0* and can not be adjusted until you have
> selected DATA A/AFSK A.
>
> Finally, in AFSK A if CONFIG:AFSK TX = FIL ON, make sure that the
> MARK frequency in MMTTY is the same as PITCH and do not tune by
> "clicking in the waterfall".
>
> 73,
>
>     ... Joe, W4TV
>
>
> On 2019-03-12 11:23 AM, JAY wrote:
> > I have the KI03BU installed.No problem RX but unable to TX. I know there
> > has to be some settings I am missing.
> > This was installed at Elecraft.
> >
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


-- 
73

KI4TXP  JAY