[Elecraft] Settings for Digital use

[Barry]

Jay,
     If you are in data A mode, the easiest thing to do is just turn on 
your VOX. The tones will turn your transmitter on. Just make sure you 
set the mike/line in setting so that there are 4 bars of ALC showing and 
a 5th just flickering. You may need to adjust the VOX gain, but it 
should work well this way. This is what I do and have had no problems.

73,
Barry
K3NDM

------ Original Message ------
From: "JAY" <ki4txp at gmail.com>
To: Elecraft at mailman.qth.net
Sent: 3/12/2019 11:23:52 AM
Subject: [Elecraft] Settings for Digital use

>I have the KI03BU installed.No problem RX but unable to TX. I know there
>has to be some settings I am missing.
>This was installed at Elecraft.
>
>
>--
>73
>
>KI4TXP  JAY
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html