[Elecraft] KAT Problems

[Nr4c]

Maybe this has been asked before, but, what antenna is selected on radio for 40 and 160 meters?  Is RF on these bands bypassing the KOA500/KAT500



Sent from my iPhone
...nr4c. bill


> On Jun 2, 2019, at 8:16 PM, Bill Frantz <frantz at pwpconsult.com> wrote:
> 
> A crude test for power output is to see if the dummy load gets warm/hot.
> 
> 73 Bill AE6JV
> 
>> On 6/2/19 at 3:15 PM, a.durbin at msn.com (Andy Durbin) wrote:
>> 
>> If neither track 160 and 40 but do track other bands then I would look at the 
>> RF signal to check its frequency, amplitude, and spectral purity.     A dummy 
>> load, RF sampler,  and spectrum analyser would make this easy but I don't know 
>> what equipment you have available.
> ---------------------------------------------------------------------------
> Bill Frantz        |"After all, if the conventional wisdom was working, the
> 408-356-8506       | rate of systems being compromised would be going down,
> www.pwpconsult.com | wouldn't it?" -- Marcus Ranum
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html