[Elecraft] K3S AGC action in CW

[Ken K3IU]

There are numerous AGC adjustments available in the CONFIG 
menu. You can probably find something to suit you there.
73, Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

On 7/19/2019 4:14 AM, Roger wrote:
> Hi,
>
> when operating the K3S in CW mode I found there is no difference in
> switching between AGC-F(ast) and AGC-S(slow). It seems the "default" setting
> is on slow and does not go to fast (compared to the decay characteristic in
> SSB).
> The manual explains that the AGC Fast/Slow response should also be effective
> in CW.
>
> Can anyone confirm this behavior (or not)?
>
> Firmware version is 5.66 (actually supposed to be 5.67 with the "label" of
> the previous version).
>
> 73/Roger - DL5RBW
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kenk3iu at cox.net
>