[Elecraft] FSK-D, Y-BOX & WinKeyer - config help please

[Mark Musick]

Kevin,
I think going to the FLDIGI reflector is your best bet.
It is good to know it is a FLDIGI issue and not a hardware issue.
Sorry I couldn’t be more help.
Good luck finding the fix and please let us know here on the Elecraft reflector what you find.

73,
Mark, WB9CIF

From: Kevin, N4TT <kkinderen at gmail.com>
Sent: Thursday, July 18, 2019 02:45
To: Mark Musick <markmusick at outlook.com>
Cc: Elecraft Reflector Reflector <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] FSK-D, Y-BOX & WinKeyer - config help please

Hi Mark... I'm sure you're right that it is something Fldigi is sending but it is not part of the macro. It's the same macro I use with AFSK (and CW). It seems to only happen when the macro contains <RX> which is supposed to put the rig back into receive at the end of the macro. If I send the same macro without <RX> then there are no additional characters sent.

I'll probably head over to the fldigi forum soon and see what's said there.

Kev



On Wed, Jul 17, 2019 at 10:39 PM Mark Musick <markmusick at outlook.com<mailto:markmusick at outlook.com>> wrote:
Hi Kevin,
I don't use FLDIGI, but I can tell you what you are seeing is not a hardware issue.
The reason your seeing TT N4TT PSE K is because that is what FLDIGI is sending.
You need to look at the setup in FLDIGI.
Is there a message that has TT N4TT PSE K that is chained to the message you created?
Look in the FLDIGI manual or help file your answer may be there.

73,
Mark, WB9CIF

-----Original Message-----
From: elecraft-bounces at mailman.qth.net<mailto:elecraft-bounces at mailman.qth.net> <elecraft-bounces at mailman.qth.net<mailto:elecraft-bounces at mailman.qth.net>> On Behalf Of Kevin, N4TT
Sent: Thursday, July 18, 2019 00:52
To: Elecraft Reflector Reflector <elecraft at mailman.qth.net<mailto:elecraft at mailman.qth.net>>
Subject: [Elecraft] FSK-D, Y-BOX & WinKeyer - config help please

I seem to be digging a deeper hole so it's time to come to the K3 experts again.

I'm still trying to get FSK (not AFSK) to work. My setup is a K3s, Y-Box, WinKeyer and Fldigi.

I think I have everything set up properly but something very strange is happening. My CQ string is:

<TX>
CQ CQ CQ de <MYCALL> <MYCALL> <MYCALL>
CQ CQ CQ de <MYCALL> <MYCALL> <MYCALL> pse k <RX>

What shows up on Fldigi when sending:

CQ CQ CQ de N4TT N4TT N4TT
CQ CQ CQ de N4TT N4TT N4TT pse k
TT N4TT PSE K

Note that last line. I don't know where it's coming from. And it is showing up because tones are still being generated. The tone stops right after PSE K (caps).

I have another macro:

<TX>
<CALL> de <MYCALL> <MYCALL> kn
<RX>

It sends:
 de N4TT N4TT kn
T KN

The physical setup:

WinKeyer PTT to Y-Box FSK-in (tied to Accy pin1) WinKeyer KEY1 to Y-Box PTT-in (tied to Accy pin 4)

Radio is in DATA FSK-D 45 bps.

I'm not sure what else to try.

73,
Kevin N4TT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net<mailto:Elecraft at mailman.qth.net>

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to markmusick at outlook.com<mailto:markmusick at outlook.com>