[Elecraft] FSK-D, Y-BOX & WinKeyer - config help please

[Mark Musick]

Hi Kevin,
I don't use FLDIGI, but I can tell you what you are seeing is not a hardware issue.
The reason your seeing TT N4TT PSE K is because that is what FLDIGI is sending.
You need to look at the setup in FLDIGI.
Is there a message that has TT N4TT PSE K that is chained to the message you created?
Look in the FLDIGI manual or help file your answer may be there.

73,
Mark, WB9CIF

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Kevin, N4TT
Sent: Thursday, July 18, 2019 00:52
To: Elecraft Reflector Reflector <elecraft at mailman.qth.net>
Subject: [Elecraft] FSK-D, Y-BOX & WinKeyer - config help please

I seem to be digging a deeper hole so it's time to come to the K3 experts again.

I'm still trying to get FSK (not AFSK) to work. My setup is a K3s, Y-Box, WinKeyer and Fldigi.

I think I have everything set up properly but something very strange is happening. My CQ string is:

<TX>
CQ CQ CQ de <MYCALL> <MYCALL> <MYCALL>
CQ CQ CQ de <MYCALL> <MYCALL> <MYCALL> pse k <RX>

What shows up on Fldigi when sending:

CQ CQ CQ de N4TT N4TT N4TT
CQ CQ CQ de N4TT N4TT N4TT pse k
TT N4TT PSE K

Note that last line. I don't know where it's coming from. And it is showing up because tones are still being generated. The tone stops right after PSE K (caps).

I have another macro:

<TX>
<CALL> de <MYCALL> <MYCALL> kn
<RX>

It sends:
 de N4TT N4TT kn
T KN

The physical setup:

WinKeyer PTT to Y-Box FSK-in (tied to Accy pin1) WinKeyer KEY1 to Y-Box PTT-in (tied to Accy pin 4)

Radio is in DATA FSK-D 45 bps.

I'm not sure what else to try.

73,
Kevin N4TT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to markmusick at outlook.com