[Elecraft] FSK-D, Y-BOX & WinKeyer - config help please

[Jim Rhodes]

OK, just to make sure. The FSK signal on the ACC connector goes to pin 1,
the PTT signal goes to pin 4 and the ground connection goes to pin 5. From
your description I am not sure how you have everything wired. I use a box I
made years ago that has the 15 pin connectors like the Y-box and 9 pin
connectors for 2 serial ports with transistor switches for FSK and PTT.
(Have been using this for years longer than the Y-box has been around. My
WinKeyer is also old and doesn't do RTTY, but then I don't need it to. This
is used on my K3, but the connector is the same of course.

On Wed, Jul 17, 2019 at 7:58 PM Kevin, N4TT <kkinderen at gmail.com> wrote:

> I seem to be digging a deeper hole so it's time to come to the K3 experts
> again.
>
> I'm still trying to get FSK (not AFSK) to work. My setup is a K3s, Y-Box,
> WinKeyer and Fldigi.
>
> I think I have everything set up properly but something very strange is
> happening. My CQ string is:
>
> <TX>
> CQ CQ CQ de <MYCALL> <MYCALL> <MYCALL>
> CQ CQ CQ de <MYCALL> <MYCALL> <MYCALL> pse k
> <RX>
>
> What shows up on Fldigi when sending:
>
> CQ CQ CQ de N4TT N4TT N4TT
> CQ CQ CQ de N4TT N4TT N4TT pse k
> TT N4TT PSE K
>
> Note that last line. I don't know where it's coming from. And it is showing
> up because tones are still being generated. The tone stops right after PSE
> K (caps).
>
> I have another macro:
>
> <TX>
> <CALL> de <MYCALL> <MYCALL> kn
> <RX>
>
> It sends:
>  de N4TT N4TT kn
> T KN
>
> The physical setup:
>
> WinKeyer PTT to Y-Box FSK-in (tied to Accy pin1)
> WinKeyer KEY1 to Y-Box PTT-in (tied to Accy pin 4)
>
> Radio is in DATA FSK-D 45 bps.
>
> I'm not sure what else to try.
>
> 73,
> Kevin N4TT
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimk0xu at gmail.com
>