[Elecraft] No output on CW with K3

[K9ZTV]

He means VOX.

K9ZTV

> On Jul 14, 2019, at 6:20 AM, Nr4c <nr4c at widomaker.com> wrote:
> 
> Make sure BOX is ON on all bands. 
> 
> Make sure not in TEST mode on bands with no CW out. 
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
>> On Jul 14, 2019, at 4:09 AM, VY1JA <vy1ja at northwestel.net> wrote:
>> 
>> The YCCCN Remote OPs group (VY1AAA) uses the K3S at this site (VY1JA) and
>> reported the same problem but only on Six meters.  The K3s is working
>> perfectly on all other bands.
>> It has been confirmed that the CONFIG does not redirect TX output  and tests
>> on TUNE show good output on 6 and low antenna SWR there.  As soon as this
>> unit is switched to CW  on 6 and keyed, there is no output.
>> 
>> Next troubleshooting steps for getting this GG for the RemoteOps?
>> TNX,
>> J., VY1JA
>> 
>> 
>> 
>> --
>> Sent from: http://elecraft.365791.n2.nabble.com/
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to nr4c at widomaker.com 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k9ztv at socket.net 
>