[Elecraft] No output on CW with K3

[Nr4c]

Make sure BOX is ON on all bands. 

Make sure not in TEST mode on bands with no CW out. 

Sent from my iPhone
...nr4c. bill


> On Jul 14, 2019, at 4:09 AM, VY1JA <vy1ja at northwestel.net> wrote:
> 
> The YCCCN Remote OPs group (VY1AAA) uses the K3S at this site (VY1JA) and
> reported the same problem but only on Six meters.  The K3s is working
> perfectly on all other bands.
> It has been confirmed that the CONFIG does not redirect TX output  and tests
> on TUNE show good output on 6 and low antenna SWR there.  As soon as this
> unit is switched to CW  on 6 and keyed, there is no output.
> 
> Next troubleshooting steps for getting this GG for the RemoteOps?
> TNX,
> J., VY1JA
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com