[Elecraft] Control of K3s from computer

[Nr4c]

RS-232 set to USB. 

Sent from my iPhone
...nr4c. bill


> On Jan 16, 2019, at 1:40 PM, Dave Sublette <k4to.dave at gmail.com> wrote:
> 
> I had the K3s operating correctly controlling it with an RS232 cable from
> the computer.  When I try to replace that with a USB cable, the radio isn't
> found.  The computer says the port is operating correctly. I'm stumped.
> 
> The software's the N1MM.  I've made an inquiry there.
> 
> Perhaps there is a menu item that needs attention?  I have been through it
> all, but don't recall that there is.
> 
> Any suggestions?
> 
> Dave, K4TO
> 
> ps -- The P3/SVGA is running an external monitor just fine and the control
> path evidently goes through the P3.  I have the proper cable connected.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com