[Elecraft] Driving KPAA500 from KX3

[Don Wilhelm]

John,

If the voltage displayed on the KPA500 is within range, nothing has to 
be done.

See page 9 of the KPA500 manual for instructions on checking the voltage.
If the voltage is not in range, change the transformer tap.  See page 8 
of the manual.

73,
Don W3FPR



On 1/15/2019 8:43 PM, John Pierce wrote:
> Just got 220v to my shack.  I put the 220V fuses into the KPA500 and
> connected the amp to 220v using the ELecraft power cable.  I was expecting
> to do something to the transformer wiring in the KPA500, but did not see any
> instruction to do so.  Is that all there is to powering the KPA500 from
> 220vac?