[Elecraft] Driving KPAA500 from KX3

[Walter Underwood]

See “Mains Voltage Setting” starting on page 5 of the manual.

https://ftp.elecraft.com/KPA/Manuals%20Downloads/E740150%20KPA500%20Owners%20man%20Rev%20D4.pdf <https://ftp.elecraft.com/KPA/Manuals%20Downloads/E740150%20KPA500%20Owners%20man%20Rev%20D4.pdf>

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On Jan 15, 2019, at 5:43 PM, John Pierce <ja-pierce at verizon.net> wrote:
> 
> Just got 220v to my shack.  I put the 220V fuses into the KPA500 and
> connected the amp to 220v using the ELecraft power cable.  I was expecting
> to do something to the transformer wiring in the KPA500, but did not see any
> instruction to do so.  Is that all there is to powering the KPA500 from
> 220vac?
> 
> 
> 
> John
> 
> AD2F
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wunder at wunderwood.org