[Elecraft] KX3 - Mode switch skips AM

[jh3sif at sumaq.jp]

Many thanks, Don.
Now AM mode came back. But I do not remember when I set AM MODE OFF.

73 de JH3SIF, Keith

> 2019/01/14 7:53、Don Wilhelm <donwilh at embarqmail.com>のメール:
> 
> Keith,
> 
> Go to the menu and make sure AM MODE is turned ON.
> 
> 73,
> Don W3FPR
> 
> On 1/13/2019 5:37 PM, Keith Onishi wrote:
>> Hello,
>> Tapping MODE switch on my KX3 with MCU 02.90, most latest firmware, switches mode from SSB -> CW -> FM, then back to SSB. It does skips AM.
>> I have not switched to AM for long time. I think I was able to select AM by tapping MODE before.
>> I went through KX3 Owner’s Manual to look for any configuration to skip any specific mode, but found none.
>> Sending “MD5;” from KX3 utility software switches KX3 to AM mode. So MPU is OK on selecting a mode except switching the mode by MODE switch.
>> I restored my KX3 configuration backed up almost 6 months ago, but the symptom is same. Then I reloaded the latest firmware to my KX3, but the same result.