[Elecraft] KX3 - Mode switch skips AM

[Don Wilhelm]

Keith,

Go to the menu and make sure AM MODE is turned ON.

73,
Don W3FPR

On 1/13/2019 5:37 PM, Keith Onishi wrote:
> Hello,
> 
> Tapping MODE switch on my KX3 with MCU 02.90, most latest firmware, switches mode from SSB -> CW -> FM, then back to SSB. It does skips AM.
> I have not switched to AM for long time. I think I was able to select AM by tapping MODE before.
> I went through KX3 Owner’s Manual to look for any configuration to skip any specific mode, but found none.
> Sending “MD5;” from KX3 utility software switches KX3 to AM mode. So MPU is OK on selecting a mode except switching the mode by MODE switch.
> I restored my KX3 configuration backed up almost 6 months ago, but the symptom is same. Then I reloaded the latest firmware to my KX3, but the same result.
>