[Elecraft] please disregard....Re: setting up DX-Lab for my kx3

[HB]

Never a waste when you learn and share!

> On Feb 23, 2019, at 12:46 PM, JEROME SODUS <jsodus at comcast.net> wrote:
> 
> Hello,
> 
> Please disregard my yesterday's email. 
> 
> I fired up the system today and everything works, which is a surprise since no changes were made.
> 
> I have no explanation for this right now but will attempt to see if the port was shut-off; Dave-AA6YQ cautions about that from time to time. I thought I had done that operation a long time ago but maybe all the MS-updates messed that up. 
> 
> Sorry to take up the bandwidth.
> 
> 73 Jerry KM3K
> 
>> On February 22, 2019 at 10:39 PM JEROME SODUS <jsodus at comcast.net> wrote:
>> 
>> 
>>    Hello,
>> 
>>    I want to set-up DX-Lab for two radios, namely my Yaesu FT-950 and the KX3.
>> 
>>    No problem with DX-Lab controlling the FT-950.  
>> 
>>    (I do know that the KX3 has communicated with the KX3-Utility program today, so that tells me the USB connection works.)
>> 
>>    But DX-Lab and the KX3 are not talking to each other, so here are my settings for the KX3 in DX-Lab:
>> 
>>    Port....7
>> 
>>    Baud....38400
>> 
>>    Word....8
>> 
>>    Parity....N
>> 
>>    Stop....1
>> 
>>    DTR....N
>> 
>>    RTS....Y 
>> 
>>    Also, in Device-Manager, flow-control is 'None'.
>> 
>>    Am I ok here or should I be looking elsewhere?
>> 
>>    TIA for any reply.
>> 
>>    73 jerry km3k
>> 
>> 
>> 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html