[Elecraft] please disregard....Re: setting up DX-Lab for my kx3

[JEROME SODUS]

Hello,

Please disregard my yesterday's email. 

I fired up the system today and everything works, which is a surprise since no changes were made.

I have no explanation for this right now but will attempt to see if the port was shut-off; Dave-AA6YQ cautions about that from time to time. I thought I had done that operation a long time ago but maybe all the MS-updates messed that up. 

Sorry to take up the bandwidth.

73 Jerry KM3K

> On February 22, 2019 at 10:39 PM JEROME SODUS <jsodus at comcast.net> wrote:
> 
> 
>     Hello,
> 
>     I want to set-up DX-Lab for two radios, namely my Yaesu FT-950 and the KX3.
> 
>     No problem with DX-Lab controlling the FT-950.  
> 
>     (I do know that the KX3 has communicated with the KX3-Utility program today, so that tells me the USB connection works.)
> 
>     But DX-Lab and the KX3 are not talking to each other, so here are my settings for the KX3 in DX-Lab:
> 
>     Port....7
> 
>     Baud....38400
> 
>     Word....8
> 
>     Parity....N
> 
>     Stop....1
> 
>     DTR....N
> 
>     RTS....Y 
> 
>     Also, in Device-Manager, flow-control is 'None'.
> 
>     Am I ok here or should I be looking elsewhere?
> 
>     TIA for any reply.
> 
>     73 jerry km3k
> 
>      
>