[Elecraft] Annoying Beeps

[Bob McGraw K4TAX]

 From the amp MENU, scroll to SPEAKER, then press EDIT,  and set to ON 
or OFF as you prefer.   This will give you a beep when you switch from 
STBY to OPER.   It also controls the FAULT annunciation as heard via the 
radio if set to ON.     See page 19 in the KPA500 manual.  This IS NOT 
controlled via the radio.  You will hear a beep when any button on the 
KPA500 has been pressed. I certainly would not describe this as 
"feedback tone".

73

Bob, K4TAX


On 12/27/2019 7:11 AM, Richard wrote:
> Whenever I push a button, any button, on the KPA-500, for example, to go from STBY to OPER, I hear an audible feedback tone. Very annoying.
>
> I’ve discovered that by setting CONFIG:SW TONE to OFF, it goes away… but then so do all the other tones the radio produces, tones I DON’T want to silence.
>
> Do I have any other options?
>
> Cheers.
>
> Richard Kunc ~ W4KBX
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net