[Elecraft] Can I use an XV144 Transverter with my KX2?

[Thorsten Fricke]

Thanks Don! This sounds good and I'll head for the XV144 then ;-)

73 es HNY
Thorsten, DH4FT

Am 26.12.19 um 18:56 schrieb Don Wilhelm:
> Thorsten,
>
> The XV144 will work with the KX2 - it needs only the KEYOUT signal
> from Ring 2 of the ACC jack (or the the RCA jack on the KX2 to
> KXPA100) and coax from the KX2 ANT jack.
>
> Set the XV144 up as shown for a Non-Elecraft transverter with a single
> coax input as shown in the XV144 Owners manual.
>
> 73 and HNY,
> Don W3FPR
>
> On 12/26/2019 12:05 PM, Thorsten Fricke wrote:
>> Merry Christmas everyone, hope you have received some nice presents ;-)
>>
>> Maybe a silly question, but I didn't find anything in the manual and
>> would like to be on the safe side. I may be able to purchase a used
>> XV144 Transverter and would be interested in using it with my KX2 (only
>> in my shack at home). There needs to be some dip switch settings done
>> before using the Transverter, but as the manual is only mentioning the
>> K2 and K3, I am not sure on whether using K3 settings are appropriate or
>> whether I need to use another setting (and which one).
>>