[Elecraft] Can I use an XV144 Transverter with my KX2?

[Don Wilhelm]

Thorsten,

The XV144 will work with the KX2 - it needs only the KEYOUT signal from 
Ring 2 of the ACC jack (or the the RCA jack on the KX2 to KXPA100) and 
coax from the KX2 ANT jack.

Set the XV144 up as shown for a Non-Elecraft transverter with a single 
coax input as shown in the XV144 Owners manual.

73 and HNY,
Don W3FPR

On 12/26/2019 12:05 PM, Thorsten Fricke wrote:
> Merry Christmas everyone, hope you have received some nice presents ;-)
> 
> Maybe a silly question, but I didn't find anything in the manual and
> would like to be on the safe side. I may be able to purchase a used
> XV144 Transverter and would be interested in using it with my KX2 (only
> in my shack at home). There needs to be some dip switch settings done
> before using the Transverter, but as the manual is only mentioning the
> K2 and K3, I am not sure on whether using K3 settings are appropriate or
> whether I need to use another setting (and which one).
>