[Elecraft] K3/0 Mini

[Jim Rhodes]

That's why I got mine from Elecraft.

On Tue, Dec 24, 2019 at 9:05 AM Don Wilhelm <donwilh at embarqmail.com> wrote:

> All 15 pin Y cables are not the same.  You need to have all 15 pins
> connected from end to end.  VGA cables will NOT work.
>
> 73,
> Don W3FPR
>
> On 12/24/2019 9:22 AM, Jim Rhodes wrote:
> > The ACC cable can be connected through a simple Y cable (I think I bought
> > mine from Elecraft) so that the remoterig box can be left connected all
> the
> > time. Or you can buy a YBox, or build your own like I did before they
> were
> > available.  As for the PTT, I put together a box with 6 parallel RCA
> jacks
> > for PTT on one side and 6 more on the other side for KEYOUT. (I have amps
> > for the 2 meter and 70 cm transverters.) The only other connection I need
> > to worry about is the serial cable. I updated the i/o boards to the new
> one
> > with the USB connection so that I can leave both the serial and USB
> cables
> > connected at all times. So no cable switching when I want to go remote. I
> > live in an apartment building, so my KPA500 is packed away in a box for
> the
> > time being.
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimk0xu at gmail.com
>


-- 
Jim K0XU
jim at rhodesend.net