[Elecraft] K3/0 Mini

[Don Wilhelm]

All 15 pin Y cables are not the same.  You need to have all 15 pins 
connected from end to end.  VGA cables will NOT work.

73,
Don W3FPR

On 12/24/2019 9:22 AM, Jim Rhodes wrote:
> The ACC cable can be connected through a simple Y cable (I think I bought
> mine from Elecraft) so that the remoterig box can be left connected all the
> time. Or you can buy a YBox, or build your own like I did before they were
> available.  As for the PTT, I put together a box with 6 parallel RCA jacks
> for PTT on one side and 6 more on the other side for KEYOUT. (I have amps
> for the 2 meter and 70 cm transverters.) The only other connection I need
> to worry about is the serial cable. I updated the i/o boards to the new one
> with the USB connection so that I can leave both the serial and USB cables
> connected at all times. So no cable switching when I want to go remote. I
> live in an apartment building, so my KPA500 is packed away in a box for the
> time being.
>