[Elecraft] K3S - DATA A vs AFSK A

Nr4c nr4c at widomaker.com
Sat Dec 21 22:27:04 EST 2019


DATA A is USB data mode. AFSK A is Audio FSK and is used for RTTY which is a LSB data mode. 

Sent from my iPhone
...nr4c. bill


> On Dec 21, 2019, at 3:58 AM, Keith Onishi <jh3sif at sumaq.jp> wrote:
> 
> When I run MMVari after running WSJT-X, I sometimes have the similar experience. So, I have to re-tune the audio property for MMVari. It seems WSJT-X sets Windows audio property to its favorite setting and never set it back to the original setting on its termination. 
> 
> 73 de JH3SIF, Keith
> 
>> 2019/12/21 17:37、HP <pfizenmayer at q.com>のメール:
>> 
>> K3S using internal USB codec and W7 . 
>> 
>> I have an issue I dont understand --- N1MM /MMTTY -- RTTY --- using VOX for PTT. 
>> 
>> If I leave LIN OUT levels (about 35) and Windows levels (49 percent) then WSJT -sets up with 4 bars ALC 5th flickering - 
>> makes no difference if I run WSJT alone or run it thru N1MM running WSJT no change in settings . 
>> 
>> Then try to use AFSK A for RTTY I get no ALC bars at all - I see the RTTY diddles on the MMTTY screen - nothing I do will get any bars 
>> if I do nothng but switch to DATA A change nothing else - I get solid 7 bars and have to reduce MIC gain (LIN) to 10-11 from 35-37 to get 4 bars 5th flashing . 
>> 
>> 
>> 
>> I have the RTTY freq set 915-170 -MMTTY decodes fine in RX. 
>> 
>> What am I missing ?? 
>> 
>> 
>> Hank K7HP 
>> 
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jh3sif at sumaq.jp 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com



More information about the Elecraft mailing list