[Elecraft] K3S - DATA A vs AFSK A

[Keith Onishi]

When I run MMVari after running WSJT-X, I sometimes have the similar experience. So, I have to re-tune the audio property for MMVari. It seems WSJT-X sets Windows audio property to its favorite setting and never set it back to the original setting on its termination. 

73 de JH3SIF, Keith

> 2019/12/21 17:37、HP <pfizenmayer at q.com>のメール:
> 
> K3S using internal USB codec and W7 . 
> 
> I have an issue I dont understand --- N1MM /MMTTY -- RTTY --- using VOX for PTT. 
> 
> If I leave LIN OUT levels (about 35) and Windows levels (49 percent) then WSJT -sets up with 4 bars ALC 5th flickering - 
> makes no difference if I run WSJT alone or run it thru N1MM running WSJT no change in settings . 
> 
> Then try to use AFSK A for RTTY I get no ALC bars at all - I see the RTTY diddles on the MMTTY screen - nothing I do will get any bars 
> if I do nothng but switch to DATA A change nothing else - I get solid 7 bars and have to reduce MIC gain (LIN) to 10-11 from 35-37 to get 4 bars 5th flashing . 
> 
> 
> 
> I have the RTTY freq set 915-170 -MMTTY decodes fine in RX. 
> 
> What am I missing ?? 
> 
> 
> Hank K7HP 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jh3sif at sumaq.jp