[Elecraft] Transmit Equalizers and FT4/8

[Don Wilhelm]

Pete,

If you are using DATA A mode, that is done for you automatically.
OTOH, if you are "doing it the hard way" and using USB, then the answer 
is yes, and also set compression to zero.

73,
Don W3FPR

On 8/29/2019 9:33 AM, N4ZR wrote:
> I normally run my K3's TX equalizer to minimize low frequencies and 
> frequencies above 2000 Hz.  Am I right to assume that I should set it 
> back to flat when doing FT4/8?
>