[Elecraft] Transmit Equalizers and FT4/8

[Mark Musick]

Pete,
For FT4/FT8 or any other digital mode TX Equalization is set flat automatically when you select DATA mode.

73,
Mark, WB9CIF

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of N4ZR
Sent: Thursday, August 29, 2019 13:34
To: Elecraft List <elecraft at mailman.qth.net>
Subject: [Elecraft] Transmit Equalizers and FT4/8

I normally run my K3's TX equalizer to minimize low frequencies and frequencies above 2000 Hz.  Am I right to assume that I should set it back to flat when doing FT4/8?

-- 

73, Pete N4ZR
Check out the Reverse Beacon Network
at <http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to markmusick at outlook.com