[Elecraft] K3S, no line output on 1/8" jack

[Nr4c]

LinOut is also on the USB cable. It would show as Audio CODEC on computer sound input devices. 

Usually, USB IN/OUT use will disable if the 1/8 jacks are used (according to manual). 

Sent from my iPhone
...nr4c. bill


> On Aug 20, 2019, at 1:59 PM, Bob <WB4SON at gmail.com> wrote:
> 
> Hi,
> 
> I've been using my K3S for a few years now, and recently tried to record a
> friends signal using the Line Out stereo 1/8" jack on the back of the rig.
> However, there is no line level audio output on that jack.  Like many, I
> use the USB interface for audio in/out when working digital modes, and
> wonder if there is some conflict between USB audio and being able to get
> Line Out audio on that back panel jack.
> 
> Any thoughts?
> 
> 73, Bob, WB4SON
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com