[Elecraft] K2 Front Panel Resistance Check Readings :(

[Fred Jensen]

Analog multimeters were so much easier!

73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 8/18/2019 4:21 PM, Don Wilhelm wrote:
> If the reading is actually zero - like when the leads are touched to 
> each other, then that is zero ohms, an indication of a short.
> OTOH, if the reading is blank or whatever your ohmmeter reads when the 
> leads are attached to nothing, then that is an indication of infinite 
> resistance or something very high - and that qualifies as greater then 
> (> symbol) 100k ohms.
>
> 73,
> Don W3FPR
>